U.S. Patent No. 8,856,780
01
02
03
04
OFF
ACC
ON
START
05
06
OFF
ACC
ON
START
07
OFF
ACC
ON
START
08
OFF
ACC
ON
START
09
OFF
ACC
ON
START
10
11
OFF
ACC
ON
START
12
13
14
15
OFF
ACC
ON
START
16
17
OFF
ACC
ON
START
18
OFF
ACC
ON
START
MODULE PROGRAMMING PROCEDURE - 1 OF 2
Close driver door. Re-open driver door to wake
up data bus.
Press Unlock on OEM remote. If the vehicle is
not equipped with an OEM remote, press the
module programming button.
Wait, LED will fl ash GREEN once [1x]. If LED
does not fl ash GREEN, press Unlock on OEM
remote again.
Turn key to ON position.
Wait, LED will turn solid RED.
Turn key to OFF position.
Remove key.
Insert key into ignition.
Turn key to ON position.
Wait, LED will fl ash GREEN.
Turn key to OFF position.
WARNING: Disconnect power last. Disconnect
module from vehicle.
Connect module to computer and proceed
with extended programming.
WARNING: Do not press module programming
button. Connect power fi rst. Connect module
to vehicle.
Turn key to ON position.
Wait, LED will turn solid GREEN for 2 seconds.
Turn key to OFF position.
Turn key to START position.
www.flashlogic.com
Automotive Data Solutions Inc. © 2018
DIR-CH(RS)-CH8-[FLRSCH10]-EN
PAGE 12 OF 23
• 20180321
DOC.: #48370
