Flashforge Creator 3 Pro, Быстрый старт

Страница: 5 / 44

03
Precautions for Unpacking the Equipment
4. Remove the buckles on the X-axis and Y-axis synchronous belts.
1. Take out the top accessories and pearl cotton.
2. Remove the tape from the machine.
3. Take out the internal pearl cotton block.
6. Press and hold [Z-] continuously until the build plate rises to a higher position, and
then take out the foam block below.
5. Connect the printer to the power supply, after power on, and then click [Tools] and
[Manual] in turn on the touch screen to enter the manual control interface.