Manufacturer Limited Warranty Policy:
Manufacturer warrants that on the date of purchase this product. This Limited
Warranty extends for Thirty Six (
36
) months from the date of purchase.
DAMAGE TO PARTS OR PRODUCTS RESULTING FROM TAMPERING, ACCIDENT, ABUSE, MISUSE, NEGLIGENCE, UNAPPROVED
MODIFICATIONS, FIRE OR OTHER HAZARD; IMPROPER INSTALLATION OR OPERATION; OR NOT BEING MAINTAINED IN
ACCORDANCE WITH THE MAINTENANCE PROCEDURES SET FORTH IN MANUFACTURER’S INSTALLATION AND OPERATING
INSTRUCTIONS VOIDS THIS LIMITED WARRANTY.
Installation
Attach and secure the controller onto the panel stand. Place the device onto a
clean desired surface, where it can be easily accessible to the user. Use the
attached adhesive pad* to secure the device onto the surface. Should you
wish to remove / re-locate the controller, you may use alcohol or similar
cleaning formula to remove the left-over adhesive residue.
* The supplied adhesive pad is designed for one time use. You may replace it
with other double side adhesive tapes.
Installation
- Secure clamp mount part
#3
onto the controller.
- Use the supplied screws to secure clamp mount part
#1
and
#2
onto your desire mounting location. Use the supplied rubber pad
to help adjusting the grip and size of the mount.
- Insert clamp mount part
#3
into part
#2
.
Adjust the angle and
tighten the part.
Motorcycle Handle-Bar Clamp
1
2
3
- 2 -
