www.flash-butrym.pl
4
5.1
Connecting DMX signal
The connection is performed using cable with XLR-female -> XLR-Male plugs.
5.2
Voltage specification
Total Power
Frequency
1500W
50/60Hz
5.3
Connecting power supply
The connection is performed using power cable (included).
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
CAUTION!
In the case of cable damage do not attempt to repair. Replacement or repair can be made only
on the manufacturer or by a person with appropriate permissions.
6
OPERATION MANUAL
6.1
DMX channel list
1CH mode
Channel
Function
Effect
CH 1
Spray smoke
0: No function
1-255: Spray smoke
