Flash F7300253, Руководство пользователя

Страница: 4 / 16

The connection is performed using
power cable with PowerCon connector
( i n c l u d e d ) . Th e d e v i ce m u s t b e
operated by qualified personnel.
5.2 Voltage specification
Input Voltage Total Power Frequency
110-240V 250W 50/60Hz
5.3 Connecting power supply
CAUTION!
In the case of cable damage do not attempt to repair.
Replacement or repair can be made only on the manufacturer or by
a person with appropriate permissions.
Make sure that the power grid supply
parameters are consistent with device
parameters and limitations are not
exceeded.
Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light’s life; if it’s
not enough, the lamp will be dark. Please restart it after turning
off light for 20 minutes until full-cooling. Frequent switching will
reduce the life span of lamps and bulbs; intermittent using will
improve the life of bulbs and lamps.
FUNC
LCD DISPLAY
ENTER
UP
DOWN
DMX
ERR
User Manual
•
Instrukcja Obsługi
Menu Structure: