
www.flash-butrym.pl
2
1
INTRODUCTION
Thank you for purchasing LED MOVING HEAD 200W 3in1 BEAM – SPOT - WASH. For safety reasons and
to ensure the trouble-free operation, carefully read the instructions.
2
SAFETY INFORMATION
1.
Installation should be done by qualified personnel in order to minimize the risk of accidental
electric shock
2.
Disconnect the power supply before installation.
3.
Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4.
Do not use the device in high humidity conditions and at temperatures above 40° C
5.
The device must be installed on stable structures
3
MAINTENANCE
1.
Regularly clean the fan and the fan cover to maintain good air circulation.
2.
After turning the unit off, wait 20 minutes before restarting to avoid overheating and damage
to electronic components.
4
PRODUCT SPECIFICATION
Power consumption: 300W
Power supply voltage: 100 - 240V
Voltage frequency: 50/60Hz
Diode type: Standard LED (Single color)
Number of diodes: 1
Diode power: 200W
Display: LCD Matrix
Color: Color wheel - 9 white
ZOOM: Yes
Beam angle (min): 7°
Beam angle (max): 21°
Dimming: Linear: 0 - 100%
Prism: 4-facet
FROST filter: Yes
FOCUS: Electronic
GOBO wheel: two GOBO wheels: 7 pa 9 pa open
PAN range: 540°
TILT range: 270°
Number of DMX channels: 18
DMX standard: DMX 512
Control interface: 5 buttons
Operating modes: DMX512, Auto, Sound-controlled, Master / Slave
AC IN: powerCON
AC OUT: powerCON