Flash F7100322, Руководство пользователя

Страница: 4 / 12

The connection is performed using
power cable with PowerCon connector
( i n c l u d e d ) . T h e d ev i c e m u s t b e
operated by qualified personnel.
Make sure that the power grid supply
5.2 Voltage specification
Input Voltage Total Power Frequency
100-240V 40W 50/60Hz
5.3 Connecting power supply
CAUTION! In the case of cable damage do not attempt to repair.
Replacement or repair can be made only on the manufacturer or by a
person with appropriate permissions.
parameters are consistent with device
parameters and limitations are not
exceeded.
Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light’s life; if it’s
not enough, the lamp will be dark. Please restart it after turning off
light for 20 minutes until full-cooling. Frequent switching will reduce
the life span of lamps and bulbs; intermittent using will improve the
life of bulbs and lamps.
User Manual
•
Instrukcja Obsługi