Flash F7100306, Руководство пользователя

Страница: 3 / 10

LED PAR Set 4x PAR 36 12x3W F7100306
www.flash-butrym.pl
2
1 INTRODUCTION
Thank you for purchasing LED PAR Set 4x PAR 36 12x3W. For safety reasons and to ensure the trouble-free
operation, carefully read the instructions.
2 SAFETY INFORMATION
1. Installation should be done by qualified personnel in order to minimize the risk of accidental
electric shock
2. Disconnect the power supply before installation.
3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures
3 SPECIFICATION

Power consumption: 65W

Power supply voltage: 220 - 240V

Voltage frequency: 50/60Hz

Diode type: Standard LED (single color)

Number of diodes: 48

Diode power: 3W

Display: LED - 4 characters

Color: RGBW

Beam angle (min): 25°

Beam angle (max): 25°

Dimming: Linear: 0 - 100%

Number of DMX channels: 8

DMX standard: DMX 512

Control interface: 4 buttons

Operating modes: Automatic, DMX-512, Master/Slave, sound control

Additional information: max. height: 193cm, min. height: 105cm, weight including the stand:
5,5kg

AC IN: IEC-C14

DMX IN: XLR - 3 pin

IP Rating: IP20

Housing made: ABS

Cooling: Active

Height [cm]: 19

Width [cm]: 65

Depth [cm]: 12

Weight [kg]: 3

Set includes: a stand foot, a controller, 2 bags, a power cable, a foot controller