LED Double-sided WASH-BEAM Moving Head 4x10W + 1x10W F7000543
www.flash-butrym.pl
3
4
INSTALLATION
After removing the packaging, check if the device was not damaged during transport. Before connecting to
the mains, make sure that the device is securely mounted. The manufacturer is not responsible for damage
caused by unstable mounting.
Ensure proper connection to the mains and proper grounding. Make sure that the electrical parameters are
consistent with device requirements. All activities, including connecting the device to the mains must be
performed by qualified personnel.
5
CONNECTIONS
The device is equipped with the following interfaces:
1.
DMX (in/out): XLR 3-pin socket
2.
Power (in): IEC C14
5.1
Connecting DMX signal
The connection is performed using cable with XLR-female -> XLR-Male plugs.
5.2
Voltage specification
Input Voltage
Total Power
Frequency
110~220V
100W
50/60Hz
5.3
Connecting power supply
The connection is performed using power cable with IEC C14 connector (included).
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
