Flash Big Eye, Руководство пользователя

Страница: 4 / 16

The connection is performed using
power cable with PowerCon connector
( i n c l u d e d ) . Th e d e v i ce m u s t b e
operated by qualified personnel.
5.2 Voltage specification
Input Voltage Total Power Frequency
100~245V 300W 50/60Hz
5.3 Connecting power supply
CAUTION! In the case of cable damage do not attempt to repair.
Replacement or repair can be made only on the manufacturer or by
a person with appropriate permissions.
Make sure that the power grid supply
parameters are consistent with device
parameters and limitations are not
exceeded.
Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light’s life; if it’s
not enough, the lamp will be dark. Please restart it after turning
off light for 20 minutes until full-cooling. Frequent switching will
reduce the life span of lamps and bulbs; intermittent using will
improve the life of bulbs and lamps.
User Manual
•
Instrukcja Obsługi
MENU MAP
1. System Setup
Run Mode
DMX Address
Channel Mode
Invert Pan
Invert Tilt
Pan-Tilt Swap
Encoder
No signal
Screen Saver
Language
Load Default
2. Manual Drive
DMX / Sound / Auto 3 / Auto 2 / Auto 1 / ART
1. Pan
2. Pan Fine
3. Tilt
4. Tilt Fine
5. P-T Speed
6. Zoom
7. Rotation
8. Dimmer
9. Strobe
10. Red
11. Green
12. Blue
13. White
14. Linear CTO
15. Macro Colour
16. Static Effect
17. Shape
18. Shape Speed
19. Background R
20. Background G
21. Background B
22. Background W
23. Reset
PAN
TILT
ZOOM
ROTATION
001-255
17 Ch (Standard) / 32 Ch (Extend) / 89 Ch (Full)
OFF / ON
OFF / ON
OFF / ON
ON / OFF
Clean / Keep
ON / OFF
EN / CH
5. System Info
3. Motor Calibration
4. System Test