Flash Technology
Revision A - 2/13/2020
50
MONITORING STATUS
This menu is only available when Cellular Eagle is selected as Primary or Alternate Data Monitoring Method . This
menu provides information such as signal strength, cell number, cell ESN and time since last poll.
The Test Connect option allows the user to manually test the unit’s ability to connect to the monitoring system. All
headings in the Monitoring Status menu, other than Test Connect, are informational only.
Table 3-5: Monitoring Status Menu Options
Monitoring Status
Signal Bars
Signal DB
CIP
Cell Number
Cell ESN
Since Last Poll
Test Connect
Yes /No
Yes Confirm?
Ethernet Link: (Status)
LOCAL DIAGNOSTICS
The Local Diagnostics menu allows the user to review the status of the FTC 270 and beacon and marker tier, if
installed. The Local Diagnostics menu provides valuable information when troubleshooting the system.
SITE EVENT HISTORY
Site Event History provides a list of the 30 most current events or alarms affecting the operation of the system. A
few examples of events that may be found in the event history are:
•
CFG CHANGE (Configuration Change)
•
T1B1 COMM (Tier 1 Beacon 1 Communication failure)
•
MKRT1 COMM -> ALM/RST (Marker Tier 1 Communication failure)
•
REBOOT EVENT (Z) (System Reboot with reboot code)
All events, except “REBOOT EVENT”, are followed by an arrow and either “ALM” (Alarm) or “RST” (Restore) to
show their state at the time of the event. Move the * to an event and press ENTER to display the time in days
hours and minutes since the event occurred.
Note: The FTC 270 maintains event times and up to 30 are displayed.
Local Diagnostics
Site Event History
1
Mode Override Off
Mode Override Off
0D 0h 15M
Mode Override On
Mode Override On
0d 0H 20M
Display Board
Runtime Days
i.e. 400d
