33.
Do NOT lean over this outdoor fireplace when lighting or when in use.
34.
Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or
furniture.
35.
Avoid breathing smoke from the fire and avoid getting it into your eyes.
36.
This outdoor fireplace should be thoroughly inspected and cleaned on a regular basis.
37.
After a period of storage and/or non-use, check for signs of damage and creosote build-up. Do NOT operate until
necessary repairs and/or cleanup are executed.
38.
Use only factory authorized parts. The use of any part that is NOT factory authorized can be dangerous.
39.
Do not force parts together as this can result in personal injury or damage to the product.
40.
Deaths, serious injury or damage to property may occur if the above is not followed exactly.
OPERATING INSTRUCTION:
Lighting
1.
Make sure there is no more than a small amount of ash in the bottom of the bowl.
2.
Place a layer of dry kindling or a natural fire starter onto the center of the grate.
3.
Place above that a layer of dry seasoned hardwood that is cut to lengths no more than 3/4 the diameter of the bowl.
4.
Use a match to light kindling or fire starter.
5.
Using a hook and heat resistant gloves, replace spark guard once the kindling or fire starter is lit
Tending the Fire
You may need to shift and/or add logs for an ideal experience.
Do NOT place a hot spark guard or hot fireplace tools onto combustible surfaces such as grass, wooden deck or
furniture.
1.
Using a hook and heat resistant gloves, carefully remove spark guard.
2.
While using a long-handled fireplace tool, shift coals and logs to allow additional airflow.
3.
Do NOT add gasoline, kerosene, diesel fuel, lighter fluid or alcohol to relight or enhance an existing fire.
4.
Wait until glowing coals have developed before adding any additional wood. If additional wood is required, place
wood on top of coals. Be careful not to shift ashes.
5.
Using a hook and heat resistant gloves, replace spark guard.
Extinguishing
1.
Allow fire to burn out on its own.
2.
Do NOT use water to extinguish as this is dangerous and can cause damage to this outdoor fireplace.
Inspecting
This outdoor fireplace should be inspected on a regular basis to ensure product safety and longer product life.
Do NOT attempt to inspect this outdoor fireplace until the fire is COMPLETELY out.
1.
Check handles to make sure they are secure.
2.
Check components for any signs of damage or rust.
3.
If damage to any component is detected, do NOT operate until repairs are executed.
Cleaning
This outdoor fireplace should be cleaned on a regular basis to promote safer experiences and longer product life. Note:
After repeated use, a slight discoloration of the finish may occur.
Do NOT attempt to clean this outdoor fireplace until the fire is COMPLETELY out.
Do NOT use oven cleaner or abrasive cleaners as they will damage this product.
Do NOT clean any part of this outdoor fireplace in a self-cleaning oven as it may damage the finish.
Do NOT use pressure washer to clean this outdoor fireplace, as this may damage this product.
1.
Wipe exterior surfaces with a mild dishwashing detergent or baking soda.
2.
For stubborn surfaces use a citrus based degreaser and a nylon scrubbing brush.
3.
Rinse clean with water.
4.
Remove built-up creosote from base, hood and spark guards with a chimney cleaning product.
