![background image](http://html1.mh-extra.com/html/flash-furniture/sda-ad608001-nat-gg/sda-ad608001-nat-gg_assembly-instructions_2302954004.webp)
Step 1
Attach Support Legs (Part C) to
Support Connector (Part A) using (4)
M6*15 Screws (Part F). Tighten using
Allen Wrench (Part I). Bring to the
upright position.
NOTE: Ensure Feet are facing down.
C
Support Legs
Support Connector
Step 2
Attach Support Pole (Part D) to
Support Connector (Part A)
using (1) M8*57 Screw
(Part E) and (1) Nut (Part G).
Tighten by placing the
Wrench (Part H) on the Nut
and using the Allen Wrench
(Part I) to tighten the screw.
Step 3
Insert the Clevis Pin (Part J) into the top of the
Support Pole. Insert one end of the Spring
(Part K) into the Bolt then attach the end of
the Chain (Part L) onto the other end of the
Spring.
Remove the bolt from the Anchor Shackle (Part M) and
insert through the link in the Chain.
Step 4
Lift the Chair (Part B) and line the top U Bracket
between the sides of the Anchor Shackle (Part M).
Insert Bolt removed in Step 3 and securely tighten the
nut using the Wrench and Allen Wrench as described
in Step 2.
……………………………………………………………………………………………………………………………
Wrench
N
ut
Support pole
M8*57 Screw
Allen
Wrench