www.flash-butrym.pl
Page 3
Fault Analysis and Exclusion.
Faults
analyze the causes
remove failures
without
electricity
The Fuse burned out
Change the fuse
No music-
active or
insensitive
MIC broken
MIC
No motor
rotation
Pictorial or no
motor or a
vibration
machine
beating
Bad electrical motors
The electrical
motors
No light or
Light weakness
Black out, but
Others normal
Lens dirty
See Page 4
Maintenance
Laser diode broken
Blue diode
Green diode, Red
diode
NC board broken
NC board
Wrong operation about
the working mode
See Page 4
Instruction
Out of control,
but other diode
fan normal
Wrong operation about
the working mode
See Page 4
Instruction
NC board broken
NC board
SMPS broken
±6V
Maintenance
Please clean the lens regularly. Do not do it using the wet cloth or other chemical.
The clean times is depend on the using frequency and surrounding condition; it is
recommended that should be cleaned every 20 days.
Please clean the lighting surface and engine outlet regularly.
Technical parameters:
rated voltage: DC5V
rated power: 5W
laser power: 100mW green light
laser wave length: green laser wavelength 532nm
laser color: green
control mode: stand alone, music active
cooling system: Fan system
lamp body size: L160×D180×H70(mm)
weight: 0.5kg
