Flash butrym F7300250, Руководство пользователя

Страница: 5 / 20

5.5 Manual control
This interface is used to control the current lamp, and at the same time automatically
enter the host state (do not receive DMX signal, send DMX signal to the bus to the slave).
The manual menu will display 8 channels according to the standard 8 channels set in the
setup menu.
Options Explain
1CH. Dimming 0-255 Press the ‚OK’ key to enter the edit state. At this time,
select the hundreds place and press the „Up” and
„Down” keys to change the channel value. Press the
„OK” button again to select the ten digits for editing.
Press again to exit edit state
.... 0-255
7CH. Focusing
0-255
8CH. Reset 0-255
5.6 Set up
Options Explain
Operating
mode
DMX Slave status: Receive DMX signal from
console or host
Auto 1 Master status: self-propelled and send DMX
signal to slave
Auto 2
Random
Program
Scene Run
Auto, Colse,
Scene 20, Scene
19... 1
Scene Set
Scene Save, Scene Select (1-20) Scene Time, AutoRun (On/Off),
Dimmer, Shutter, Color, Gobo, Roto Gobo RT, Focus, Zoom
DMX Address 1-512
Channel Mode 8 CH
DMX Signall Keep/Clear
Display On/Off
Linear Color On/Off
Load Default
On/Cancel
BIG LOGO PROJECTOR IP65 300W
•
Art No F7300250