LED MOVING HEAD BEAM 7x15W RGBW 4in1 OSRAM 5°/25° F7000563a
www.flash-butrym.pl
7
5.2
Voltage specification
Input Voltage
Total Power
Frequency
90~260V
100W
50/60Hz
5.3
Connecting power supply
The connection is performed using power cable with PowerCon connector (included).
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
CAUTION!
In the case of cable damage do not attempt to repair. Replacement or repair can be made only
on the manufacturer or by a person with appropriate permissions.
6
MAINTENANCE AND CLEANING
The following points have to be considered during the inspection:
1.
All screws for installing the devices or parts of the device have to be tightly connected and must
not be corroded.
2.
There must not be any deformations on the housing, color lenses, fixations and installation spots
(ceiling, suspension, trussing).
3.
Mechanically moved parts must not show any traces of wearing and must not rotate with
unbalances.
4.
The electric power supply cables must not show any damage, material fatigue or sediments.
5.
Further instructions depending on the installation spot and usage have to be adhered by a skilled
installer and any safety problems have to be removed.
CAUTION!
Disconnect from mains before starting maintenance operation.
In order to make the lights in good condition and extend the lifetime, we suggest a regular cleaning to the
lights.
1.
Clean the inside and outside lens each week to avoid the weakness of the lights due to
accumulation of dust.
2.
Clean the fan each week.
3.
A detailed electric check by approved electrical engineer each three month, make sure that the
circuit contacts are in good condition, prevent the poor contact of circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents. There are no serviceable parts inside the device. Please refer to the instructions under “Installation”
instructions. If you need any spare parts, please order genuine parts from your local dealer.
