Flamerite Fires Essence Gotham 1300, Установка, меры предосторожности и обслуживание

Страница: 11 / 13

11 | P a g e
WARNING: Before any maintenance/cleaning is undertaken, always disconnect the fire from the mains
power supply.
Replacing Radia Flame LED Lamps
Dimmable 240V 6W 3000k E14 LED lamps
We recommend lamp replacement by a Flamerite service engineer or similarly qualified persons in order to
avoid a hazard. Allow a suitable time for the lamps to cool then remove the glass & fuel effect (see
Installation). Remove the two screws from either side of the fuel bed and lift out of place. Remove and
replace the lamps, fuel bed, fuel effect and glass. Please note that replacement lamps are covered by a 2-year
warranty. Replacements are available from Flamerite Fires Ltd
Replacing
Nitra Flame
LED Strips
LED Strips and driver replacement must be undertaken by a Flamerite service engineer or similarly qualified
persons in order to avoid a hazard. Please note that replacement lighting is covered by a 2-year warranty.
Replacements are available from Flamerite Fires Ltd
Cleaning
The fire can be cleaned with a soft cloth and non-abrasive glass cleaner.
•
No power to the fire: Check the wall socket, plug, fuse and lamps.
•
Heat turns off quickly after turn on: Set thermostat to a higher temperature.
• No illumination: Make sure fire is turned on. Check heater is working, if so check lamps.
• Heater blowing cold air: The safety cut out may have operated. Check for obstruction around the
heater. If continually a problem and fitted into a cavity wall or chimney breast check with installer the
inset opening has been 100% fully sealed from drawn air and draft.
• Noise when illuminated: Due to moving parts, the electric fire will make a noise.
• Noise from the heater when in use: The sound of rushing air is normal.
Maintenance
Trouble Shooting