CONTROL PANEL FUNCTIONS
3
6
NOTICE
When this heat function is used for the first time, a slight odor may be present.
This is normal and should not occur again unless the heater is not used for an
extended period of time.
CONTROLS
FUNCTION
POWER - Press once
to turn the power ON.
Press again
to turn the power OFF.
FLAME BRIGHTNESS - Press
for desired flame brightness.
6 options.
LOW HEAT - Press once
for 750w heat. The fan starts and warm air follows
after 15 seconds.
HIGH HEAT - Press the Button again
for 1500w heat
.
HEAT OFF - Press the Button again
to turn the heat
OFF
.
NOTE
: The fan will continue to blow to allow heater element to cool down,
and then turns off.
TIMER CONTROL - Press
to turn the fireplace functions off automatically
after a pre-set time from
0.5 - 8 hours
in 30 minutes increments.
The
“
time to off
”
setting appears in the digital display. The display turns off
after
10 seconds
.
NOTE
: The timer needs to be re-set each time the fireplace is turned back on.
