Roof Fan STOF
Installation and Maintenance
8
Fläkt Woods
9734 GB 2015.06.30
Specifications are subject to alteration without notice
Figure 6.
4. TRANSpORT ANd STORAge
4.1 TRANSpORT INSpeCTION
Check the fan immediately after you receive it and make sure that
it has not been damaged during transport. If you discover any
damage, get in touch with the transportation company without
delay. Briefly rotate the fan impeller to see that it rotates easily.
Check the information on the fan rating plate.
Proper procedures must be followed when transporting the
product! Faulty conditions in transporting may result in serious
damage to the product
4.2 TRANSpORT SAFeTy
The transport material is to be selected according to the
packaging and the weight of the product.
Loading must be carried out as instructed.
4.3 INTeRmedIATe STORAge
If the fan is to be stored before or in between uses, the following
needs to be taken into account:
– Original packaging is to be used. If the storage conditions
require it, additional protection may be added
– The storage environment must be dry, dust-free and not have a
high level of humidity (<70 %)
– Storage temperature must be in between –20° C and +40° C
Before commissioning, the respective instructions must be
studied thoroughly.
4.4 lIFTINg OF The FAN
Check the correct lifting method. If necessary, use the lifting lugs
shown in the Figure 6.
Fan weights can be found in this brochure at point 3.4 and also in
the fan labels.
