flakt woods CURO Touch, Технические инструкции

Страница: 12 / 16

Curo ® Touch - Technical Instruction Version 2.02
Fläkt Woods 9401 GB 2015.04.07 Specifications are subject to alteration without notice
12
sCHeDULes
exampLe 1 - weekLy sCHeDULe
Below is an example of a weekly schedule configured to run the
fans at normal speed from 08:00 to 18:00 Monday to Friday. At
all other times, the fans are turned off.
If a post heater has been fitted, this will maintain the supply air
temperature at 20°C.
Day Time Fan Speed Temp Setpoint
Monday 8-18 Normal 20 °C
Tuesday 8-18 Normal 20 °C
Wednesday 8-18 Normal 20 °C
Thursday 8-18 Normal 20 °C
Friday 8-18 Normal 20 °C
Other time Stop
sCHeDULes
Using schedules, it is possible to fully automate the unit to pro-
vide specific levels of ventilation at specific times of the day,
week or year and to activate the post-heater at a given tempera-
ture set point.
To activate schedules, the unit has to be in Automatic mode.
Each schedule also needs to be activated by pressing the grey
tick button.
weekLy (1-8)
Pressing this option selects the Weekly Schedule adjustment
screen to create a timed schedule to run daily in a week.
singLe Date (1-4)
Pressing this option selects the Single Date Schedule adjust ment
screen to create a timed schedule to run for 24 hours on any
single date.
Date perioD (1-4)
Pressing this option selects the Date Period Schedule adjustment
screen to create a timed schedule to run from any date to any
other date.
weekLy sCHeDULe
A weekly schedule is defined as a schedule that automati cally
runs from a given time to a given time on specified days.
During a weekly schedule, the fans can be set to run at any of the
available speeds: Stop, trickle, normal or Boost.
The eight individual weekly schedules are prioritized to remove
the potential for time periods to clash with each other. Weekly
8 Schedule has the highest priority and Weekly 1 Schedule the
lowest priority. If two or more weekly schedules have start and
end times that clash with each other, only the schedule with the
highest priority will be used, the other(s) will be ignored.
The supply and extract fans will run at the same speed when set-
up through a weekly schedule.
remember to activate the desired schedules by pressing