BlueTone™ BTHF205 User Manual
.
12
2.6.1 Using Handset AV Function
For handset supporting Bluetooth AV profiles, you can establish AV connection between the handset and the
device to enjoy music at the device side while the music is played by the handset. Depending on the handset
capability, the AV connection could be established automatically when you start playing music If your handset
does support Bluetooth AV profiles but you fail to get an AV connection when you start playing music, you must
follow your handset’s user guide to establish an AV connection before playing music.
2.6.2 AV Operations
The following operations can be used for remotely control your Bluetooth AV capable handset or media player to
play music:
Play
：
Press button
.
Pause
：
Press button
.
Stop
：
Press and hold button
for at least 3 seconds.
Forward
：
Press and hold button
╋
for at least 3 seconds.
Backward
：
Press and hold button
━
for at least 3 seconds.
2.7 Volume Adjustment
When in the connected or talk/play mode, you can adjust sound volume up or down by pressing buttons
╋
or
━
,
respectively. You can repeat the above operation until the speaker volume reaches at a desirable level.
Note
：
For most Bluetooth handset, handsfree volume control will synchronize with the handset. That is, the sound
volume of your handsfree can be controlled by your handset, vice versa. However, this may not be always true due
to variations on handset implementations chosen by different manufactures.
2.8 Pairing/Connecting your Handsfree with Other Bluetooth Equipment
2.8.1 Pairing Handsfree with Other Bluetooth Equipment
In addition to Bluetooth phone, your handsfree can also pair with other Bluetooth equipment for realizing short
distance wireless communications. Similar pairing procedures described in the previous Section 2.4 can be used.
You can also follow the user guide of the Bluetooth equipment to complete paring operations on the equipment side.
This handsfree can paired with up to 8 Bluetooth equipments (including mobile handsets). The corresponding 8 sets
of pairing information are recorded by the handsfree. Each paired equipment can wireless communicated with the
handsfree after setting up a Bluetooth connection. Please check Section 2.4.3 on procedures to set up a Bluetooth
connection.
2.8.2 Connecting your Handsfree with USB Dongle
Before pairing and connecting, you must ensure the USB Dongle has already been connected with your PC, and
Bluetooth driver software IVT’s BlueSoleil has been installed in PC.
Detailed operation procedures are as follows:
