7
Confirm & Set proper manifold pressure (see page 7)
8
Set the thermostat (if provided) to desired temperature.
If heater fails to ignite after 3 attempts, call your supplier for service.
TO SHUT DOWN
1
Close fuel supply.
2
Move "Burner" switch to "OFF" position.
3
Wait 2-3 minutes and move “FAN” switches to the “OFF” position.
4
Disconnect heater from fuel supply.
Important Note
When heater is to be stored indoors, the connection between the propane supply cylinder(s)
and the heater must be disconnected and the cylinder(s) removed from the heater and stored
in accordance with CSA B149.5, Natural Gas and Propane Installation Code &
ANSI Z223.1/NFPA 54
7
