Flaem LightNeb P0318EM, Руководство пользователя, Страница: 25 / 140

23
5
2
3
4
PUSH
1A
6.1.2 DRYING:
6.1.2.a
After washing and rinsing all the com-
ponents, shake them to remove excess water
and reassemble them as described in the fol-
lowing paragraph
DEVICE REASSEMBLY.
At this point, to eliminate the water deposited
in the nebulisation and mesh cup (2), press key
1A (figure opposite) and wait for the device to
stop nebulising. Then switch off the unit.
WARNING This operation is very important be-
cause it avoids limescale deposit in the mesh
microholes, which could compromise the cor-
rect nebulisation in the subsequent therapeu-
tic application.
6.1.2.b To complete the drying of all compo-
nents, leave them in the open air and in a dry
place (e.g. not in the bathroom) as shown in the
figure opposite.
WARNING
Do not immerse the Device Body (1) in water
and do not wash it under running tap water.
6.2 CLEANING Device Body
Use a cloth lightly moistened with antibacterial
detergent to clean the
Device Body (1) .
Then dry it with a soft paper towel.