Fjordsen W303 Скачать руководство пользователя страница 2

Congratulations 

on your purchase  of  our instant shelter. This unit is a combination of excellent 

manufacturing and design. It is comprised of a rigid frame and durable cover. For easy assembly, 

we have marked all the parts with codes. With proper installation, use and maintenance, your unit 

will provide many years of good and suitable service. 

READ ALL THE INSTRUCTIONS BEFORE ASSEMBLY! 

1.

The  proper erection and installation  of this building requires a  high level  of  care and safety.

We recommend the safety regulations be complied with during the installation. It includes but

is not limited to:

-

Safety hats, protective clothing

-

Safety harnesses for all elevated workers

-

Proper ladder, cage, and safety operation

2.

Be  cautious  with  the  surroundings.  The  cover  of  the  building  will  protect  against  normal

falling  leaves  and  light  debris,  however,  large,  fast  or  sharp  falling  items  etc.  may  cause  a

puncture or tear in the cover material. So, keep the building away from such harmful things.

Be  careful  with  power  and  heat  sources.  Don’t  keep  heat  sources  near  the  tarpaulin,  Don’t

expose to open flame.

3.

Choose a windless day to install the building. It is very difficult to attach the cover in heavy

wind.

4.

All snow accumulation on the main cover should be removed as soon as possible. Otherwise,

when old snow on the roof becomes hard with new snow falling in, it will increase the burden

of the roof badly and will damage the roof.

5.

Try to keep the building, especially its base, in a dry condition. This will help the building to

have a longer life than keeping it in a wet conditions,

6.

The  user  should  be  responsible  for  the  parts  missing  or  damage  occurred  during  the

installation.

7.

Don’t make alteration of the frame. Don’t hang anything besides included parts to the frame.

Damages,  consequential  damages,  or  injuries  caused  by  improper  installation,  alteration,

improper use, or damages caused by snow, wind, or any acts of nature are owing to the user.

The building is not intended for occupancy for any length of time.

Содержание W303











Отзывы: