Turn system
counter-
clockwise
to open
Hold glass at
90 degree angle
directly under
faucet
6
PULL tap handle
forward to “TAP”
beer (approx 2/3 of
a 16oz glass)
7
8
PUSH tap handle
backward to “TOP”
beer for 1 second
3
4
Insert can or
bottle against
back wall in
rear of base
5
Insert draft tube
and turn system
clockwise to lock
Plug-in to a wall
outlet or insert
2-AA batteries
(Note: The USB
adapter does
not charge the
machine)
1
2
Open can or bottle.
Allow bubbles to settle
for 30 seconds prior to
inserting into machine.
9
Any beer left in the
bottle or can may be
added to the glass.
CHEERS!
10
While enjoying your
Fizzics beer, swirl beer
and watch the creamy
head reappear!
Place a glass or washed bottle filled with warm water into the system, insert tube and return system to base.
Use a separate glass under faucet and pull the handle forward to run water through DraftPour for 4-5 seconds.
Drip mat and base separate for easy soap and water cleaning. If necessary wipe off system with micro fiber cloth.
Allow system to air-dry off base over night.
IMPORTANT: (1) DO NOT PUT ANY PART OF THE DRAFTPOUR INTO THE DISHWASHER
(2) DO NOT POUR ANY
LIQUID DIRECTLY INTO THE DRAFTPOUR SYSTEM
(3) DO NOT ATTEMPT TO REMOVE THE DRAFT TUBE
IMPORTANT: IF WATER ISN'T FLOWING OR FLOWING SLOWLY DURING CLEANING, THE DRAFT TUBE MAY BE
BOTTOMING OUT DUE TO THE THICKNESS OF THE BOTTOM OF THE GLASS. TRY USING A DIFFERENT GLASS.
•
•
•
•
•
•
DraftPour MUST be cleaned per these instructions after use. DO NOT let beer residue dry in the machine.
System Cleaning
TIP:
Holding the glass at an angle helps avoid
pouring “bad” foam while tapping beers with
higher carbonation levels. Straighten the glass
as the glass fills to avoid spillage.
TIP:
DraftPour uses air pressure to push beer
up the draft tube. When the can or bottle is
empty the faucet can spit. To avoid this, “tap”
less beer until becoming familiar with the ideal
amount.
Questions about the operation of your DraftPour?
Contact us at [email protected]
