background image

SLUSH PUPPiE

®

 MAKER – INSTRUCTIONS FOR USE

6

x3

using the machine

8

   Pour a further 3 Inlet Caps of salt 

into the Ice Canister through the 
Ice/Salt Inlet.

10

   Re-fi t the Inlet Cap into position 

on the lid.

9

   Pour a further 40ml of water into 

the central Ice Canister.

40ml

12

   Leave the SLUSH PUPPiE Maker running 

for approximately 15-25 minutes. Do 

not leave the SLUSH PUPPiE Maker 

unattended or exceed the running time 

(40 minutes). The amount of time until 

the desired consistency is reached will 

depend on the ambient temperature.

13

   When the mixture level drops add more 

ice cubes to the Ice Canister to a level no 

higher than 3cm from the rim of the Ice 

Canister. Do not fi ll the ice to the top of 

the canister as this cools the Ice Canister 

too much; add a couple of ice cubes at 

a time and leave a minute or two before 

adding more ice cubes. Add 2 or 3 Inlet 

Caps of salt to the Ice Canister and the 

equivalent amount of water.

Note:

 If the Ice Canister jams, 

simply turn the machine off and 

wait for the ice to melt around 

the canister, enough to allow the 

blades to rotate again. Once this 

has melted enough, add ice again, 

slowly and regularly to cool the 

canister enough to make slush.

14

   To create perfect Slush Puppies, 

wait until peaks form in the Slush 
Puppie mixture before dispensing.

Note:

After using the SLUSH PUPPiE 

Maker wait at least 15 minutes before 

using again. This will allow the motor 

to cool.

1

   Press the Mix/Off/Dispense switch to Position II (dispense).

2

   Place a cup or glass onto the Drinks Tray and turn the Tap Handle clockwise so 

that it is in the open position. The mixture will start to pour.

3

   To stop dispensing, turn the Tap Handle anti-clockwise.

4

   When you have fi nished, press the Mix/Off/Dispense switch to Off (Position O).

Dispensing Slush Puppies

Tap in 

open 

position

IMPORTANT 

DO NOT

 exceed the 1 litre limit as 

shown by the Max Fill line on the 

Slush Puppie Container.

11

   Slowly pour your Slush Puppie 

syrup mixture through the Syrup 
Inlet at the rear right of the 
Canister Lid. This is indicated 
by the BEVERAGES HIGH IN 
SUGAR CONTENT ONLY marker 
on the Canister Lid. Not suitable 
with carbonated beverages.

IMPORTANT 

Add salt to the Ice Canister only. 

The salt will not be consumed;

it is used to stop the ice mix 

from rapidly freezing.

IMPORTANT 

Add salt to the Ice Canister only. 

The salt will not be consumed;

it is used to stop the ice mix 

from rapidly freezing.

Содержание Slush Puppie









Отзывы: