manualshive.com logo in svg

Fixturlaser Shaft 100, Руководство пользователя

Fixturlaser Shaft 100 - надежный прибор для выравнивания валов. Получите бесплатное Пользовательское руководство для правильной установки и использования. Скачайте его с manualshive.com и начните работу без проблем. Надежный инструмент для точной работы с валами!

Поделиться
Скачать
background image

39

F

IXTURLASER

 S

HAFT

100

8.

To display the current machine position values touch the horizontal or
vertical 

icon. If the shafts are rotated to a position where the TD-units is

NOT positioned in the 12/6 o’clock or 9/3 o’clock position, the values are
displayed with a black mark in the top right corner of the value box and are
not real time values. You can toggle between horizontal and vertical posi-
tion values by using the different icons. See Icon index

To adjust the machine in Tripoint

TM

 mode

1.

Real time adjustment is only available at 12 and 6 o’clock position for
vertical adjustment and 3 and 9 o’clock position for horizontal adjustment.
The inclinometer senses which position it is at and automatically updates
the readings as the machine is moved. The shaft must be within ±3° from
12/6/9/3 o’clock positions before real time values are available. This is
indicated by the led on the TD-M changing from flashing green to alternate
red and green light.

2.

If shaft rotation is not possible the vertical and horizontal views, without
real time values, can be used to obtain corrective moves but after a move-
ment is carried out the three point measuring sequence must be repeated.
This can be done at any time using the 

re-measure icon.

p-0040r2.p65

1998-01-23, 13:43

39

Содержание Shaft 100



































































Отзывы:

Нет отзывов

Похожие инструкции для Shaft 100

Бренды по названию

Популярные бренды

Загрузить еще бренды