10
User‘s manual
6 Installing and Operating:
Do not touch the heated soldering tip or barrel!
Use the protection cap as safety stand for the soldering iron during
work breakes.
1. Refilling
:
Turn the soldering iron upside down and push a butane can into
the filling valve. The tank is fillied within 15 seconds. Let the gas
stabilize after filling for approx. 3 minutes.
2. Ignition:
1. Turn on the fuel by moving the control lever to the right at the
mid position (A).
2. Ignite by pushing the ignition button (B).
3. Wait 3 seconds for catalyst to glow.
3. Changing tips:
1. Make sure the soldering tip has cooled down bevore the removal.
2. Turn it anti-clockwise for loosening with a combination wrench and
fasten it clockwise.
Put on the protection cap only when the soldering iron has cooled
down completely.
soldering tip
ON/OFF switch /
control lever
see through window
Ignition
button
filling valve
Catalyst
The control lever is off in left position. - no gas supply
2
By sliding it rightwards it will click softly.
Up to the click:
3
left position - low gas supply
= low soldering temperature
mid position - ignition position
= medium high soldering temperature
right position - high gas supply
= high soldering temperature
Fig. 3
