Fixpoint 11366, Руководство пользователя

Страница: 11 / 16

11
condition before starting work.
• Remove crimping residues from cheeks and plier after
each crimping.
• Protect the angles from dirt and grease them regularly
with light machine oil.
8 Cutting, Stripping and Crimping:
• If a cutter and stripper is included, cut cables by putting it
into the tool from the labeled site and compress the tool
until opening automatically.
1. Strip the cable in a way, until app. 5-10 mm of the inner
conductor, app. 5-10 mm dielectric and app. 10 mm
of the shielding are visible.
By using a compression plug or at too lose fitting, the
stripping lengths may be varied and the shielding may be put
over the cable jacket, to get fixed fitting.
2. Turn the plug onto the cable as close as possible until
fitting well.
3. Insert the cable into the crimping plier together with the
plug.
4. Close the ejection at the front site, if included.
5. Adjust the plier until no tolerance is detectable.
6. Press together the crimping plier closely.
7. Unlock the plier, when necessary. Remove cable and
plug from the crimping plier.
9 Care, Maintenance, Storage and Transport:
• Clean the product only with a dry and soft cloth. Be
careful with cleaning to avoid scratches. For intensive
Staining you can damp the cloth with some water. Do not
use cleaning supplies and chemicals, because they can
corrode the plastic material.
• Remove residues with a small knife carefully.
• Store your product in a dry and dustproof surround when
not used for longer time. The product must be stored
impenetrable for children.
• Retain the packaging to avoid damages during transport.
• Protect the angles from dirt and grease them regularly
with light machine oil.