VIRGO 100
- 12 -
BELTPACK MIC
With the transmitter powered off, install two fresh AA batteries into the MIC.
Leave the battery compartment open.
Turn on the transmitter by pressing and holding Power switch; the indicator LED will light
green.
Press the UP/DOWN button on the front of the receiver to choose an available channel.
The channel number will increase by two digit, from 00-99. Once the last channel has
been reached, the count will cycle back to 00.
Press and hold the UP button for 2 seconds to send the channel information to the
transmitter via infrared transmission.
Press and hold DOWN button for 2 seconds and then start to scan full frequency and
finally automatically choose clearnest channel to send channel info to transmitter via
infrared transmission.
Press and hold the UP button and the channel will be fast forward.
Press and hold the DOWN button and the channel will be fast backward.
VIRGO 100H
VIRGO 100H
VIRGO 100B
VIRGO 100B
