In addition to the main sequence, each Part on the Vector Sequencer
has two simpler CV-only sub-sequencers for internal modulation. These
sequencers are limited to a maximum length of 8 steps and a range of
speeds based on standard musical divisions. They can be used to
modify the transposition, rate, length and other parameters of the main
sequence. You can also assign any of the
Velocity
outputs on the
Vector to one of the modulation sequencers for direct output of the sub
sequencer's CV values.
There are five pages in the
Mod
section, two for each sub-sequencer
and one for setting up external modulation. Turn encoder
9
to move
between them. The first page for a sub-sequencer has settings for
length, direction, rate and target parameter, the second has settings for
the value of each step.
To setup modulation of a parameter:
1. Set the length and rate of the sub-sequence.
2. Pick the parameter you want to modulate. The
Min
&
Max
values
will automatically update to match the range of the target parameter.
Also, the initial values of the sub-sequence will be set to the current
value of that parameter.
3. Enable the parameter modulation by turning encoder
8
to ON.
4. Turn encoder
9
to page over to the steps for the sub-sequence so you
can edit them. There are three rows of numbers here. The top row are
the step numbers, of course. The bottom row are the sub-sequence
actual values, which will be offset amounts. The values in the middle row,
which are gray, will show the caculated, modulated value of the target
parameter.
Parameters targeted by sub-sequence modulation will display a
super-script
S1
or
S2
to indicate their values are modulated by a sub-se-
quencer.
TIP: To directly route the output of a sub-sequencer to a velocity output,
navigate over to the
Route
page in
Globals,
and use encoder
9
to move
to the page with the velocity output you would like to assign. Turn the
encoder to select the part, then hold
Shift
and turn the encoder again to
select
S1
to output sub-sequence 1 or
S2
for the second sub-sequence.
9
Modulation
Sub Sequencers
Содержание Vector Sequencer
Страница 1: ...User Guide Vector Sequencer ...
