Installation Instructions
Install the bracket to the TV and mount to wall (kiosk should be mounted between
the standard outlet and HDMI cable). Cords should be tucked away and secured. You
need to make sure that upon installation, the kiosk covers ALL outlets/plugs/cords.
Plug in the HDMI Cable to the adapter
NOTE: BEFORE YOU CONNECT THE ADAPTER TO THE COMPUTER.
IMPORTANT STEP TO ASSURE THAT THE TOUCH SCREEN WORKS.
Plug in the kiosk power cord, mount the TV to wall bracket, and turn on kiosk
(on and off button located on the bottom right front of kiosk).
Use the TV Remote to turn on the TV, and then change input so that the TV screen
mirrors the kiosk. You will need to use the TV remote to change the display resolution
on the TV so that the FITX Program takes up the entire TV screen. You may have to
reach out to your TV supplier as the instructions to change the resolution for each TV
model may differ. You also may have to choose a few options to see which setting will
play FitX on the entire TV screen.
Once that is complete, you will need to test the touch screen. Depending on the TV
brand the kiosk touchscreen will need to be calibrated.
If touchscreen is reactive then set up is complete. If the touchscreen is not reactive/
out of calibration then follow the next steps.
pg. 3
