Fitwood TROLLSTIGEN WALLBARS, Инструкция по эксплуатации

Страница: 8 / 10

Fit the second rail on the top
of the oval bars. Start at one
end and progressively insert
oval bars until all are seated.
Use wooden block and
rubber mallet if necessary
to fully seat oval bars. Be
careful not to damage or
scratch the surface. Screw
three oval bars to the
wooden side boards with
three (3 pcs) 6 x 60 TX30
screws on the one side.
Turn the Wall bars on the
other side and screw the
oval bars with the next
three (3 pcs) 6x60 TX30
screws.
Step 3
Turn the Wall Bars front side downwards. Screw the mounting boards into a place with eight (8
pcs) 6 x 60 TX 30 screws (same screws as for the long side rails). Assemble the mounting rail with
FITWOOD logo to the upper section, and the board with TROLLSTIGEN logo to the lower section.
Step 2