FitNord SPRINT 500, Руководство пользователя

Страница: 22 / 26

21
ADJUSTING BELT TENSION
If you feel a slipping sensation when running on the treadmill, the running belt must be
tightened.
In most cases, the belt has stretched from use, causing the belt to slip. To eliminate the
slipping, tension both the rear roller bolts with the appropriate size allen wrench, turning it
1/4 TURN to the right.
Repeat if necessary, but NEVER TURN the roller bolts more than 1/4 turn at a time. The
belt tension is set properly when the running belt is 50 - 75mm from the deck.
WARNING: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET
BEFORE CLEANING OR SERVICING THE UNIT.
CLEANING
General cleaning will greatly prolong the treadmill
’s lifespan. Keep the treadmill clean by
dusting regularly. Be sure to clean the side rails, and the exposed part of the deck on either
side of the walking belt. This reduces build-up of foreign material underneath the walking
belt.
The top of the belt may be cleaned with a wet, soapy cloth. Be careful to keep liquid away
from inside the motorized treadmill frame or from underneath the belt. Warning: Always
unplug the treadmill from the electrical outlet before removing the motor cover.
Remove the motor cover and vacuum under the motor cover at least once a year.