Fitness Equipment MLD-M5, Руководство по эксплуатации продукта, Страница: 11 / 21

10
2. Connect (#1) and (#2) with 2 hex head bolts M10x25 (#64), 4 flat washers Φ10 (#56)
and 2 M10 lock nuts (#73);
3. Wrench tighten all bolts and place counterweight cushion (#32) along counterweight
guide bar (#5).
Installation steps
Figure 2
1. Place the counterweight block (#27) into the counterweight guide bar (#5) in sequence
(grooved side down), slide the weight increasing rod bushing (#30) onto the bar (#31)
with the bushing hole aligned with the topmost hole. Insert the weight increasing rod
retaining pin (#29) into the center hole of the counterweight block.
2. Slide the counterweight top block (#26) onto the weight increasing rod (#31) and the
weight increasing rod bushing (#30), place the large flat pad
Φ12 (#28) on top of the
counterweight top block (#26), and insert the L weight increasing pin (#33) into the