background image

 

11 

 

IMPORTANT ELECTRICAL INFORMATION 

 

WARNING: 

This treadmill requires a power source of 

10 amps (100-120V)

 in order to properly 

operate. For your safety, as well as the safety of others, please verify that the power source is correct 
before  plugging  the  equipment. Any power source above or  below  this  level  could  cause  significant 
damage to the equipment and or user. 

 
GROUNDING METHODS: 

This product must be grounded. Grounding provides the least resistance for electrical current and will 
reduce the risk of electric shock. The plug must be plugged into an appropriate outlet that is properly 
installed and grounded in accordance with all local codes and ordinances. Ensure that the product is 
connected to an outlet which contains the same configuration as the plug. Do not use an adaptor for 
this product. 

 

This product is for use on a nominal 100-120V circuit and has a grounding plug that looks like the plug 
illustrated  in  sketch  A.  Make  sure  that  the  product  is  connected  to  an  outlet  having  the  same 
configuration as the plug. No adapter should be used with this product. 

 

DANGER: 

 

Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check 
with a certified electrician if you are in doubt as to whether the product is properly grounded. Do not 
modify the plug provided with the product. If it will not fit the outlet, have a proper outlet installed by an 
electrician.   

 

WARNING! 

1.  NEVER use a ground fault circuit interrupt  (GFCI) wall outlet  with this treadmill. Route the power 

cord away from any moving part of the treadmill including the elevation mechanism and transport 
wheels. 

2. NEVER operate the treadmill using a generator or UPS power supply. 
3. NEVER remove any cover without first disconnecting AC power.   
4.  NEVER  expose the  treadmill  to  rain  or moisture.  This  treadmill is  not  designed  for use  outdoors, 

near pools or in any other high humidity environment. 

 

 

 
 

 
 
 
 
 
 
 
 

 

 
 

(A)

 

Содержание FA-7966

























Отзывы: