FITNESS AUDIO DX6-DR, Руководство по эксплуатации

Страница: 3 / 16

2
Instructions
Thank you for choosing FITNESS AUDIO digital wireless microphone system!
For more details, please take a few moments to read this operating manual for thorough
understanding of the function and operation of both transmitter and receiver.
In the box
DX6-DR receiver 1 beltpack transmitter a pair of antennas
audio cable switching adaptor
(plug varies from country to country)
rackmount kit (MP-90S)
(Optional Extra. Refer to Fig.1 on P.4)
square fixing plate (1XA1027)
(Refer to Fig.2 on P.4)
operation manual
**The above specifications are subject to change without prior notice.
Important usage instructions
◼
To cope with the complicated 2.4GHz wireless environment, the line-of-sight distance
between the microphone and the receiver should be shortened to ensure that the signal is not
blocked.
◼
When one receiver is used with two microphones, it is recommended that the microphones be
set to A-SCAN mode.
(Please refer to P13)
◼
When two receivers are used with four microphones, the microphones should be set in F-
CH01~F-CH04 modes respectively and the modes cannot be repeated.
(Please refer to P13)
◼ The A-SCAN mode and F-CH01~F-CH04 mode cannot be mixed in the same system.
◼
When the system encounters interference or signal interruption, try the following:

The microphone enters the A-SCAN function page and scans to search for the best
available channel.

The receiver should be kept at least 5 meters away from other WiFi, Bluetooth or 2.4GHz
devices in use.

Keep the distance between the microphone and the receiver at least 2 meters.
SYNC SET SYNC SET
C H
CH. RF AF
MHz
0 2 6
2405
C H
CH. RF AF
MHz
0 7 7
2456
S D R -5900
U H F
雙 頻 道 數 位 鎖
定 自 動 對 頻 自
動 選 訊 無 線 麥
克 風 系 統