Wireless Microphone System Operating Manual
8
Optional DH-2420 Digital Handmic
1. Cartridge
2. Battery power LED
3. 3-step power switch
(
ON-MUTE-OFF
)
4. LCD
5. Menu button
6. Setting button
7. Channel synchronizing button
8. Color cap
9. Battery compartment
10. Charging contacts
3-STEP power switch
Power status
ON
ON
MUTE
MUTE
OFF
Lock status
unlocked
locked
unlocked
locked
can’t be locked
To prevent other user from turning off the power, you may slide this switch to the right
to lock the microphone on stand-by or mute status. Slide to the left to unlock.
Battery installation & indicator
This microphone requires 2 x AA batteries to operate. To install, remove the battery cover and
slide the batteries into the battery compartment & replace the battery cover.
When the microphone is switched ON, a blue LED will blink once to denote the batteries
installed are in good condition.
If the LED remains illuminated, it means the batteries are
weak and require replacement.
Note
: Batteries contain a corrosive acid that may leak and damage the microphone
when stored for a long period. Batteries should be removed from the microphone
before storing without use for more than 4 weeks.
CHANNEL SYNCHRONIZING of the Receiver and Handmic Transmitter
1. Unscrew the microphone’s lower housing
and then press and hold the synchronizing
button until
LINK
flashes on the LCD.
2. Press and press and hold the receiver’s
SYNC
button until the frequency icon
appears. After successful channel
synchronizing, this icon will disappear
automatically.
►
►
8
1
7
9
2
3
4
6
5
10
FREQ
CH:000
LINK
SYNC
CH
FREQ
CH.
RF
AF
MHz
006
2407