Fitfiu FLYING, Инструкция по эксплуатации

Страница: 35 / 48

35
ELECTRIC SCOOTER FLYING
EN
BEFORE USE
ADJUSTMENTS
• Press the function button and the settings button ( + ) for a long time to enter settings.
•
Press the Settings button ( ) to select the parameters.
• Press the power button ( ) to make the changes.
•
Briefly press the power/headlight button to exit the setting mode
• Press the function button and the settings button ( + ) for a long time to exit the settings.
NOTE: The display contains program codes up to P17, because it is a generic display, but only the
previous described programs are usable.
Code Function
P01 Adjust the backlight brightness (1-3)
P03 Set voltage mode (24/36V), default is 36V
P04 Standby time (O- 60Min), 0 is deactivated
P06 Wheel diameter in inches
P07 Pole Ratio Adjustment
P08
Speed limit adjustment (10-40Km/h). After the speed limit has been reached, slow down before
starting.
P09 Non-zero start setting, 0 is zero start, 1 is non-zero start
P16 Total mileage traveled, access the parameter, press adjustment button 5 seconds to clear
Button
Operation
Short press Long pulse
Power/Light Button
Turns the headlight on and off
(with the scooter on). Accept
parameters.
Turns the scooter on and off.
Function button
Select the type of speed:
• slow (EC0:15km/h)
• average (MID:22km/h)
• fast (HIGH: 28km/h)
While driving - conventional cruise.
In stop - low speed cruise (6Km/h).
Adjustment button
Sample: ODO, TRIP, battery
status, engine speed