1. Components
Part Name
Part No.
S326R
Main body
S326R-01
1
Large waste bin
S326X-26
1
Hard case
S326X-17
1
Hexagonal wrench
S326X-16
1
Operating Instructions
FTS-B581
1
2. External Description
3. Applicable fiber type
Type
Cleave length
Used holder
Single fiber
Up to fiber holder type
10mm
Optional single fiber holder
Ribbon fiber
0.2 or 0.25mm pitch 2 to 12 fiber
10mm
Optional ribbon fiber holder
!
ATTENTION
：
S326R do NOT use single fiber holder for 0.16mm.
4. Hard Case Handling Instruction
1) Position hard case so that the
“FITEL” inscription is
visible from above.
2) Gently pull the tab upwards to release the lock.
3) Lift the lid open using the other hand.
4) To close the hard case, press the lid down firmly until the
lock clicks into place.
5. Operating instructions
5.1. Cleaving fiber
1) Open main body lids. Place a prepared fiber (stripped
and cleaned) across cleaving area with fiber end
inserted into the waste bin. Ensure that the stripped fiber
is long enough to reach the pinch roller.
S326R need to touch fiber holder at holder stage end.
For single or ribbon fiber cleaving, please use the fiber
holder (Optional parts).
When using ribbon fiber, check that the fibers are
aligned flatly and no fibers overlap with each other.
2) Close main body lids and push the lid release lever until
it stops. By pushing it completely, the blade will slide to cleave the fiber and send the
loose fiber to the waste bin automatically, and the lid will be automatically opened.
Tip
：
Slide the sliding blade slowly to prolong the blade life.
Lid
Pinch roller
Waste bin box
Bending pad
Lever
Blade
Pinch
roller lid
Holder
Stage
Holder
Stage
End
