Under Tough Environment
S123M series passed criteria as below
*3
• Internal battery charging
• Illumination lamp
lights up a wide area around V-grooves
• IP-52 - Rugged and compact hand held design
for demanding envi-
ronmental conditions
• Fast splice (15 sec) at low loss and Fast heating (36 sec) for ribbon
fiber
*
1
• Simple operation
with Fixed V-groove
• Splicer is compatible with the Seikoh Giken Splice-on-connector
(9mm bare fiber SOC)
• 70 cycles (Splicing & heating) for S123M4 and 160 cycles for S123M8
and S123M12 with two batteries
*
2
• Available for All METRO/LAN/FTTx fibers
including
ultra bend-insen-
sitive fibers
(e.g. EZ-Bend)
• Easy maintenance
- Toolless electrode replacement/mirror free align-
ment system
• Up-and-down fiber clamp system
allows automatic fiber re-positioning.
• Easy software upgrade
via the Internet
• PC interface software
to allow user manage splicing programs and
results
• Auto-start
shrink sleeve oven feature
• Improved GUI
to further enhance ease-of-use
• RoHS compliant
*1 By using semi-auto mode for splicing and pre-heating mode for heating.
*2 By using semi-auto mode for splicing and regular mode for heating.
Key Features
◙
FITEL Splicer SOC partners
Dust Resistance
IP5X rating dust proof
*5
Water Resistance
IPX2 rating drip proof
*4
Drop Resistance
76 cm drops from 5 different angles
*3 Above tests were performed at Furukawa Electric Labs, and do not guarantee that the machine will be undamaged
under these conditions.
*4 IPX2 rating drip proof means that the machine can be exposed to 3 mm/min drip from 4 different angles with 15°
tilt for 2.5 min each and still functions.
*5 IP5X rating dust proof means that the machine can be exposed to dust particles with a diameter of 0.1 to 25 μm
for 8 hours and still functions.
NEW
NEW
NEW
NEW
NEW
NEW