background image

18

RUNNING BELT ADJUSTMENT

Warning: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE 

CLEANING OR SERVICING THE UNIT.

Clean: General cleaning or the unit will greatly prolong the treadmill.    

Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on 

either side of the walking belt and also the side rails. This reduces the build up of foreign material 

underneath the walking belt by wearing the clean running shoes.

Warning: Always unplug the treadmill from the electrical outlet before removing the motor cover. 

At least once a year remove the motor cover and vacuum under the motor cover.

RUNNING BELT AND DECK LUBRICATION

This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck 

friction may play a major role in the function and life of your treadmill, thus requiring periodic 

lubrication. We recommend a periodic inspection of the deck. You need contact with our service 

center if you find the damage of the deck.
We recommend lubrication of the deck according to the following timetable:

•  Light user (less than 3 hours/ week)              annually  

•  Medium user (3-5 hours/ week)                       every six months

•  Heavy user (more than 5 hours/ week)         every three months
We recommend that you buy the lubrication from our distributor or directly to our company.

Attention: Any repair need the professional technician.
1.  We suggest that you should cut off the power for 10Mints after keep running 2HS ,so that it’s 

good for maintain the treadmill.

2.  For avoiding the slipping during running , the belt not too loose; for avoiding the more 

abrasion between the roller and belt and maintain the machine’s good running ,the belt not 

too tight. You can adjust the distance between plates and belt , the belt be away from the 

plates about 50-75mm on both sides ,if the best not too tight and loose.

RUNNING BELT ADJUSTMENT

Содержание TF-D6501


























Отзывы: