Fit4Home TF-1001, Руководство пользователя, Страница: 10 / 19

10
ASSEMBLY INSTRUCTIONS
STEP 2
1. Attach the Bench Support(11)and the Bench Frame(4)to the Bench Leg (5),with two M8x55L
Bolts(19) two M8 Washers(24)and two M8 Nylon Locknuts(26). Do not tighten the Locknuts.
2. Insert the Seat(40)into the Bench Frame(4), and screw them with four M6x15L Bolts(22)and
four M6 Washers(25).
3. Attach the backrest tubes(10) to the bench frame(4) with the M10X140L bole(18),two M10
washers(23) and an M10 nylon locknut(27). Insert the backrest(39) into backrest tube(10),and
screw them with four M6x35L bolts(21) and four M6 washers(25).Do not overtighten the
Locknut; the backrest Tubes must be able to pivot easily.
4. Slide the Adjustment Bar(8)into the Uprights(1), from the side shown. Turn the Adjustment Bar
so that the locking pin wraps around the Upright.