2. Use a suitable cable (purchased separately) to connect from the output to one of the
inputs on the DAC-2000.
3. Toggle the switch on the side of the unit to select the input being used.
4. Use the supplied phono cable to connect the output side of the DAC-2000 to your
amplifier.
5. Connect the DC connector from the supplied power supply to the DAC-2000.
6. Connect the power supply to a mains outlet and turn it on.
7. Power on your source device and amplifier.
8. Select the input on the amplifier which the DAC-2000 is connected to.
9. You should now be able to hear audio from your source through the amplifier. If you do
not please consult the troubleshooting section of this manual.
Specifications
1x Optical Input
EIAJ RC-5720B (Toslink) Connector
1x Coaxial Input
RCA Type 75 ohm Connector
DC Input
5v @ 600mA
LED Indicator
Power
Stereo Phono Output
RCA Type (Red = Right, White = Left)
Audio Format Support
LPCM 44kHz, 48kHz, 96kHz
Safety
● Suitable for indoor use only
● There are no user serviceable parts. Do not open the housing.
● Not suitable for use in high humidity environments.
● Keep away from water
● Only use the supplied AV/DC power supply.
● Power off source and amplifier devices prior to making connections.
