8
--- ----
E0
Cooking field does not
work
Please return the device for repair
E1
Use of wrong, too small
a pot
Use a correct pot
E2
Overheat protection
Allow the device to cool down, turn it off completely and then on
again
E3, E4
Voltage too low, too
high
Connect the device to a correct power outlet
E5
Open circuit
Please return the device for repair
E6
Ceramic plate is
overheated
Allow the device to cool down, turn it off completely and then on
again
Cleaning and maintenance
•
Pull the power plug prior to cleaning the device. Do not use any caustic cleaning
agents and make sure that no water penetrates the device.
• To protect yourself from electric shock, never immerse the device, its cables
and the plug in water or other liquids.
• Wipe off the ceramic field with a damp cloth or use a mild, non-abrasive soap
solution.
• Wipe off the casing and the operating panel with a soft cloth or a mild detergent.
• Do not use any petrol products to not damage the plastic parts and the
casing/operating panel.
• Do not use any flammable, acidy or alkaline materials or substances near the device,
as this may reduce the service life of the device and lead to deflagration when the device
is turned on.
• Make sure that the bottom of the cookware does not scrape across the surface
of the ceramic field, although a scratched surface does not impair the use of the device.
•
Make sure that the device was properly cleaned before storing it in a dry place.
Disposal
Any other servicing should be performed by an authorized service representative
Dispose of the packaging in the proper manner.
If at any time in the future you should need to dispose of this product please note that
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling
advice.
(Waste Electrical and Electronic Equipment Directive) Technical data
Name
Induction Hotplate fissler
Modell
CJ-511B、CJ-511C
Item no.
