Fiso Nortech E-TEST-II, Руководство пользователя

Страница: 8 / 32

4
Safety Information
The level of radiation is below the level known to cause eye injury through accidental short-term
exposure. However, avoid prolonged exposure to light emitted from the fiber and do not stare directly
at a light beam, visible or not.
The following safety instructions must be observed whenever the EasyTest II is operated. Failure to
comply with any of these instructions or with any precaution or warning contained in the Fiber Optic
Thermometer user’s guide is in direct violation of the standards of design, manufacture and intended
uses of the EasyTest II. FISO assumes no liability for the customer failure to comply with these safety
requirements.
THIS PRODUCT IS NOT DESIGNED FOR USE IN LIFE SUPPORT OR CRITICAL APPLICATIONS.
In no case will FISO be liable to the buyer, or to any third parties, for any consequential damage or
indirect damage which is caused by product failure, malfunction, or any other problem.
When using any electrical appliance, basic safety precautions should be followed, including the
following:
You should only use the power supply that came with your EasyTest II and verify that the voltage
specifications indicated on the power supply are compatible with the AC voltage and frequency delivered
at the power outlet.
Do not operate in wet/damp conditions.
Do not expose to outdoor conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Avoid excessive physical shock or vibration
Do not expose to temperature higher than 60 degC
WARNING
This equipment must be used as specified or the protection provided by the equipment may
be compromised. You must use this product in a normal mode and should not deviate from
the written instructions provided.