22
ENGLISH
5.8 Electrical system
The circuit diagram of the boat’s electrical system is represented
in Appendix 3.
The main power switch is located on the rear bulkhead on the
left hand side of the boat. The circuitry functions when the switch
key is turned clockwise and latched. When the key is in vertical
position, the circuitry does not function and the key can be taken
out of the ignition. However, the automated bilge pump functions
whenever the battery is connected. When the circuitry is turned
on, the devices can be operated sitting on the captain’s seat by
using the switch panel.
The navigation lights are turned on with the switch “LIGHTS”.
Remember to attach the detachable mast-head light. When us-
ing the navigation lights, the hood should not be used, since it
obstructs light from the front sector. There is a windshield wiper
on the captain’s side, which is turned on with the switch “WIPER”.
Bilge water can be checked by pressing the pump on with the
switch “BILGE”. If there is no gurgle of water on the rear right side
of the boat, the automatic bilge pump has emptied the bilge.
The electrical system has extra circuitry for several accessories
installed in post-production; there are circuitries for radio player
and two speakers. See more information on installing a radio in
section 7.2.3 CD/Radio player. The boat also has limited capacity
for an installation of a fuel-operated heater. See more informa-
tion on installing a heater in section 7.2.1 Heater. The panel on
the right side of the steering pulpit is meant for switch of devices
installed in post-production.
The operational switch and electrical devices are located as show
in Diagram 4.
