Fiskars 1054791, Руководство пользователя

Страница: 4 / 60

Timer parts
A.
Easy swivel coupling
B.
LCD Display
C.
Dial position indicator
D.
Manual on/off button
E.
Battery tray
F.
Dial
G.
– Button
H.
+ Button
K.
RESET
button
L.
Inlet (Tap Connector, Multi)
M.
Outlet (Tap Connector)
attention
:
Please read the manual
before using. / Do not direct the wa-
ter jet towards persons or animals!
/ Do not direct the water jet towards
electrical equipment!
Installing the batteries
1.
Remove the
tray from back of the Timer by sliding it
out.
2.
Insert two AA (1.5 V) alkaline bat-
teries (not included) and place the tray
back.
3.
Replace battery when low bat-
tery icon flashes.
Programming the timer
1.
Rotate
the dial to positions indicated for setup
(for
timer
,
dual
:
2.
Press
L/R
button to
switch between left and right outlet for
all programming).
3.
Left and right outlets
can function at the same time. (Water flow
will decrease when both sides are used
at once).
note
:
The dial should be in the
Run
position for the Timer to operate
(programmed mode or manual mode).
Set clock
1.
Rotate the dial to Set clock .
2.
Clock display will be in AM or PM.
3.
Press the + or – button to advance or
reverse clock time (hold button for quick
advance).
Start time
1.
Rotate the dial to
Start
time
(for
timer
,
dual
:
Press
L/R
to
choose Left or Right valve).
2.
Press the
+ or – button to set the start time (hold
button for quick advance).
How long
1.
Rotate the dial to
How
long .
2.
Press the + or – button to set the
length of watering time (1 minute up to
360 minutes).
How often
1.
Allows you to set the pro-
gram to repeat every 6, 12 hours, or from
1 to 7 days.
2.
Rotate the dial to How
often .
3.
Press the + or – button to set
the frequency.
Run
1.
Rotate Dial to
Run
.
2.
Timer wa-
ters according to programmed time, du-
ration, and frequency.
3.
The start times
and cycle duration are maintained during
Off
or
Run
mode.
4.
The dial must re-
main in
Run
position for the cycle to run.
If the dial is turned to any other position,
watering will stop.
5.
Rain drops will be
shown when the watering is on.
Set rain delay (watering delay):
1.
With the dial in the
Run
position, press-
ing ( + ) will cause a 24 hour delay to the
program (for
timer
,
dual
: Same delay
will occur on both Left and Right valves).