FISIOTECH FISIOTEK LT, Руководство по эксплуатации и обслуживанию

Страница: 9 / 37

9 of 37
3.7 SPECIAL WARNINGS
•
Periodically check the state of the locking and adjusting levers of accessories A1 and A2 (fig. 2).
•
Periodically check the state of the clamp 6 blocking knob (fig. 1).
•
Periodically check that spring pivot 20 is working properly (fig. 9).
•
Make sure that when the spring pivot located on cursors 3 (fig. 1) moves, a beeping sound can be
heard, thus ensuring that the safety microswitch is working correctly. If no sound is heard, contact
technical support.
•
The wheels with brake must be carefully checked each time they are subject to anomalous stress
(violent shock).
•
Before starting the movement, the operator must brake the wheels and make sure that all
adjustment locking knobs are suitably tightened.
•
The device power supply unit must be periodically tested in order to ensure the safety features
against electrical risks. See section “Electrical safety tests”
•
The physiotherapist must train the patient with regard to use of the mobile keyboard.
•
If the patient is unable to manage himself on his own during the rehabilitation session, he must be
assisted.
•
The power supply unit cable presents a potential risk of strangling, just as the unscrewed knobs
separated from the device could be swallowed, causing suffocation. It is therefore necessary to take
adequate precautions in the presence of children and animals.
•
Open wounds must be adequately protected so they do not come into direct contact with the device.
•
Use parts and accessories supplied by the manufacturer only.
•
Do not introduce changes to the device since they could cause the device to become unsafe to use.
•
The battery supports approximately 1000 discharge cycles
•
Keep the device well away from other devices that might be a source of disturbance.
•
If the device is used by two or more patients, the parts that come into contact with the patient must
be cleaned and disinfected.
•
When not in use, it is recommended to keep the device protected from dust and out of direct contact
with sources of heat and sunlight.