Do you have questions? Call us @ 877.777.8693 Monday – Friday, 8am-5pm EST
2021 Fishmaster All Rights Reserved 2640 Byington Solway Rd, Knoxville, TN 37931 877.777.8693 fishmaster.com
c
DES-372
REV 1.0
Step 3:
Mounting Legs To Boat
1.
1.
5.
2.
3.
2.
3.
Mark the holes to
know where to drill.
Do not apply 3M 5200 adhesive to deck or screw holes until parts 1-2 of
Step 3 is completed to both the front and rear feet.
Mark to know where
to place the standoff.
Assemble the standoff through the
leg and from the inside of the console.
Using a 3/8” drill bit, drill a
hole through the side upright.
Place the standoff rod through the
hole and mark where it touches on the
console. Use 14” long 3/8” Drill Bit.
DRILL IN REVERSE, and
use a 45 degree chamfer
drill bit to prevent gel
coat damage.
Attach leg sections to the
boat by applying 3M 5200
marine adhesive between
and in the holes. Then
screw down the foot.
Step 4:
Assembling The Standoffs
Hardware Needed:
4
*
TM
TM
4.
Measure standoff and cut with
a fine tooth handsaw to the
appropriate length.
PRO TIP: Be sure to use the longer
deck screws for the front feet and the
shorter deck screws for the rear feet.
Deck Screws
